Concrete Block Making Machine Begins Production in the Lagos Free Zone, Nigeria..

The BlockKing-36MS concrete block making machine, shipped from West Africa to Lagos, Nigeria, at the end of 2020, was installed and commissioned by Conmach technicians in the Lagos Free Zone, Nigeria. The block making machine was shipped to Lagos with a 500-liter single-shaft mixer, two conveyor belts, seven transport carts, four molds (including two block molds and two paving molds), and 1,000 pallets.

Concrete Block Making Machine Performance Specifications.

The BlockKing-36MS concrete block making machine is in mass production in the Lagos Free Zone, Nigeria. Performance Specifications: 230x230x450 mm (9-inch) block yield / 10 units / press 10,000 units / shift, 200x200x400 mm (8-inch) block yield / 12 units / press 12,000 units / shift, 150x200x400 mm (6-inch) block yield / 16 units / press 16,000 units / shift, 125x200x400 mm (5-inch) block yield / 18 units / press 18,000 units / shift, 100x200x400 mm (4-inch) block yield / 22 units / press 22,000 units / shift, paving stone yield 1 m2 / press 1,300 m2 / shift, curb stone yield 5-12 units / press 5,000-12,000 units / shift.

Concrete block production equipment specifications.

The BlockKing-36MS concrete block production machine, which began production in the Lagos Free Zone, Nigeria, features semi-automatic operation. The vibrating press's hydraulic characteristics include a hydraulic pump flow rate of 72 l/min, a hydraulic pump motor of 18.5 kW, and a hydraulic stroke of 5. The vibrating press's vibrator specifications include a single eccentric vibrator, six vibrators, and 4 x 5.5 kW and 1 x 2.2 kW vibrator motors. Other equipment specifications include a tray size of 115 cm x 135 cm x 40 mm, four sensors, electrical components from GmtCnt / Siemens / Telemecanique, motors from Gamak / Elk / Volt, output circuit length of 4 m, and a 1.5 kW motor.